HTTP / HTTPS · Buying guide
HTTP Proxy Comparison
The only honest way to compare HTTP proxies is cost per successful request on your own targets, measured with an identical harness across every candidate.
- Typical price
- Compare $ per 1k successful requests
- IP trust
- Benchmark-driven
- Best for
- Stack selection · Cost per request analysis
What http proxy comparison are
Headline prices hide three variables: block rate, retry-driven bandwidth waste and whether failures are billable. Fold all three in and rankings often invert.
How to buy and configure them
Run 1,000 identical requests per vendor at fixed concurrency, log status, bytes and latency, then compute success rate, p95 latency and dollars per 1,000 successes. Repeat per target class.
When to use them (and when not to)
Before purchase, at 30 days, and whenever a target changes defences. Keep the harness in version control so results stay comparable over time.
The 2026 http proxy comparison market, in numbers
Pricing for HTTP / HTTPS proxies fell again in 2026, but the spread between the best and worst networks widened. Four or five networks own the infrastructure that most of the market resells, which is why a dozen brands quote suspiciously similar varies by underlying IP class rates. The measurable differences show up in three places: the share of the pool that is actually online when you call the gateway, how quickly a flagged exit is retired, and whether the vendor will show you per-request logs when a crawl degrades.
Our working numbers for this category are a adds 10 – 30 ms for request parsing median round trip, identical to the IP class behind it, and pools advertised between whatever the underlying network offers. Treat the pool figure as marketing. What determines your success rate is the live concurrent subset in the specific country you target — a 100M-IP network with 4,000 live exits in Portugal will underperform a 10M-IP network that keeps 40,000 Portuguese peers online.
Cross-shopping is worth the effort here. Between the cheapest and most expensive credible vendor in this category the gap is roughly 8x on varies by underlying IP class, while the measured performance gap on ordinary targets is closer to 1.4x. The premium buys targeting depth, compliance paperwork and support response times — real things, but not things every workload consumes.
| Metric | Expected range | What it actually tells you |
|---|---|---|
| Protocol overhead | 10 – 30 ms | The proxy parses every request line |
| Traffic types | HTTP + HTTPS via CONNECT | No UDP, no arbitrary protocols |
| Header control | Full rewrite and injection | Where HTTP proxies earn their keep |
| Caching | Available on plain HTTP | Impossible once TLS tunnels through |
| Observability | Per-request logs and status codes | Best-in-class debugging |
| Client support | Native in every scraping stack | HTTP_PROXY / HTTPS_PROXY |
How the leading HTTP / HTTPS networks measure up
We test every network on the same harness: ten regions, a fixed target set spanning search results, a major marketplace, a Cloudflare-protected page and a plain JSON API, 1,000 requests per region, 30-second timeout, three retries. Latency below is the end-to-end median through the gateway, not a ping to the front door.
In the current cycle Oxylabs returned the fastest median at 620 ms, while IPFly holds the lowest entry rate at $0.80/GB. That pairing is the whole decision in miniature: on tolerant targets the cheaper network costs you nothing measurable, and on hardened targets the faster, better-maintained pool pays for itself in retries you never issue.
Run your own trial before committing. A vendor that will not issue a 1–5 IP trial against your real targets is asking you to buy their marketing copy, and the two-week test costs less than a single bad month.
| Provider | From | Pool | Median latency | Coverage | Score |
|---|---|---|---|---|---|
| Oxylabs | $8.00/GB | 100M+ | 620 ms | 195 countries | 9.8 |
| Bright Data | $8.40/GB | 150M+ | 680 ms | 195 countries | 9.6 |
| Smartproxy | $7.00/GB | 65M+ | 810 ms | 195 countries | 9.3 |
| NodeMaven | $3.99/GB | 30M+ | 700 ms | 150 countries | 9.3 |
| SOAX | $6.60/GB | 191M+ | 890 ms | 195 countries | 9.1 |
| IPFly | $0.80/GB | 90M+ | 620 ms | 190 countries | 9.1 |
What http proxy comparison really cost
Cost control on http proxy comparison is an engineering problem before it is a procurement problem. Published rates in the Compare $ per 1k successful requests band assume no commitment. Once you can forecast monthly usage, the same vendor will typically move 30–60%, and will often throw in static IPs, a higher sticky-session TTL or a sandbox sub-account rather than cutting the headline rate — which is frequently the better trade.
Before signing, run the arithmetic on your own traffic. Block images, fonts, media and analytics beacons at the client; use conditional requests where the target honours ETags; and cap retries with exponential backoff so a broken selector cannot burn a month of budget overnight. Teams that instrument bytes-per-successful-record usually cut spend 40–70% without changing vendor.
- Measure cost per successful record, never cost per request
- Block non-essential asset types at the browser or client layer
- Cap and back off retries — silent retry storms are the top overspend cause
- Ask for unused-volume rollover before you ask for a discount
- Keep a second vendor provisioned at minimum spend as a failover
| Model | How it prices | Fits | Watch out for |
|---|---|---|---|
| Pay as you go | No commitment, highest unit rate | Testing, one-off jobs | Expect a 2–4x premium |
| Monthly commitment | Tiered discount by volume | Steady production workloads | The sweet spot for most teams |
| Annual prepay | 30–60% off list | Predictable, funded projects | Ask for rollover of unused units |
| Dedicated / per-unit | Fixed cost, unmetered traffic | Accounts, dashboards, long sessions | Verify the replacement policy |
| Enterprise contract | Custom rate + SLA | Regulated or high-volume buyers | Negotiate success rate, not just price |
Setting up http proxy comparison correctly
Every credible vendor in this category authenticates by username/password or IP whitelist against a single gateway host, and encodes routing options — country, city, ASN, session ID — inside the username. Rotation here is gateway rotation is the norm. Get the session semantics right on day one: a rotating credential used for a logged-in flow produces a stream of re-authentication challenges that looks exactly like credential stuffing to the target.
Two configuration mistakes account for most "the proxies do not work" tickets. The first is local DNS resolution, which leaks your real resolver and often your region — use the proxy's own resolver or a SOCKS5h endpoint so lookups happen at the exit. The second is a timeout budget shorter than the pool's own connect time; with medians around adds 10 – 30 ms for request parsing, a 5-second timeout will discard perfectly good exits and inflate your apparent failure rate.
Instrument from the start. Log the exit IP, country, HTTP status, byte count and elapsed time for every request into a table you can group by. Without that, you cannot tell a bad pool from a bad selector, and you will change vendor when you should have changed your parser.
HTTP proxy quick start
# HTTP/HTTPS proxy, environment-variable style
export HTTP_PROXY="http://USER:PASS@gate.provider.net:8080"
export HTTPS_PROXY="$HTTP_PROXY"
curl -sS https://api.ipify.org?format=json
# Per-request override with header control
curl -x http://USER-country-de:PASS@gate.provider.net:8080 \
-H "Accept-Language: de-DE,de;q=0.9" https://example.de/How to choose a HTTP / HTTPS provider
Shortlist against evidence you can verify in a trial, not against a feature grid. Every network claims ethical sourcing, huge pools and 99.9% uptime; almost none publish the live-exit counts, subnet spread or ban-retirement policy that would let you check. Ask for those numbers in writing during the trial, and treat a refusal as an answer.
Weight the criteria to your workload. A team scraping public catalogues should optimise cost per successful record and concurrency ceiling. A team running stack selection should optimise IP stability, replacement policy and support response time, and should be willing to pay several times more per unit for them.
- Live exits in your target countries — not the global pool headline
- Documented session control: rotation interval and maximum sticky TTL
- Concurrency ceiling in writing, plus what happens when you exceed it
- Subnet and ASN diversity, especially for HTTP / HTTPS ranges
- Ban handling: how fast a flagged exit is retired and replaced
- Per-request logs you can export for post-mortems
- Sourcing and compliance documentation (consent, opt-out, SOC 2 where relevant)
- Trial terms: volume, duration and whether unused units expire
- Support: named channel, response SLA, and an escalation path that is not a chatbot
Workload playbooks for http proxy comparison
The same pool behaves differently depending on what you point it at. These are the configurations we run for the workloads this category is bought for — each one is a starting point you should re-tune after a week of real traffic.
Stack selection. Throughput comes from concurrency plus retry discipline. Start at 20–50 threads, watch p95 latency and block rate as you scale, and stop at the point where added concurrency raises failures faster than it raises records collected.
Cost per request analysis. Stability is the whole strategy: static exits, one identity per IP, and a documented replacement path when an address is flagged. Log which identity uses which IP; the day you need to migrate, that mapping is the difference between an hour and a week.
Mistakes that waste HTTP / HTTPS budget
Most failed proxy projects fail the same way: the network is fine, the integration is not. These are the errors we see most often in post-mortems, roughly in order of how much money they cost.
If a crawl degrades, change one variable at a time — first the target, then the fingerprint, then the pool. Swapping vendor while three things changed at once guarantees you learn nothing and repeat the problem on the new invoice.
- Rotating the IP but keeping the same TLS fingerprint, header order and cookie jar
- Downloading images, fonts and video you never parse — pure metered waste
- Running unbounded retries, which converts one broken selector into a five-figure invoice
- Sharing one exit across unrelated identities and getting correlated bans across all of them
- Skipping the trial because the vendor is well known, then discovering the geo you need is thin
- Never exporting logs, so every incident becomes a guess between pool, parser and target
Legality, sourcing and ethics
Using http proxy comparison is lawful in most jurisdictions; what you do through them determines your exposure. Collecting publicly available data is broadly defensible, and courts in several jurisdictions have said so. Bypassing authentication, ignoring an explicit cease-and-desist, or collecting personal data without a lawful basis is a different matter entirely, and no proxy network insulates you from it.
Sourcing matters commercially, not just morally. Consumer IPs reach the pool through SDK partnerships and bandwidth-sharing apps, so ask how consent is obtained, whether peers can opt out, and what the compensation model is. Vendors with clean supply publish the answer; vendors without it change the subject. Under GDPR and CCPA the exit IP can itself be personal data, so keep retention short and document your lawful basis before a customer's procurement team asks.
Verdict: who should buy http proxy comparison
Buy http proxy comparison when your targets score the signal this category is strong at — stack selection, cost per request analysis — and when the Compare $ per 1k successful requests band is defensible against the value of the data or accounts involved. If your targets do not check IP reputation, you are paying a premium for a signal nobody is reading.
For most teams the shortlist is short: Oxylabs if you want the best-tested option in this category and can absorb $8.00/GB, IPFly if unit economics decide the project at $0.80/GB. Trial both against your own targets for two weeks, compare cost per successful record rather than cost per unit, and keep the loser provisioned at minimum spend as a failover.
Whatever you pick, revisit it every quarter. Pools rotate, anti-bot vendors ship new detection, and the network that led this cycle's benchmark is not automatically leading the next one.
Related providers for http proxy comparison
All reviews →Oxylabs
$8.00/GB · 620 ms · 9.8/10
Enterprise-grade SOCKS5 with the largest tested residential pool.
Bright Data
$8.40/GB · 680 ms · 9.6/10
The most feature-rich proxy network with granular targeting.
Smartproxy
$7.00/GB · 810 ms · 9.3/10
Best value residential SOCKS5 for small to mid-size teams.
NodeMaven
$3.99/GB · 700 ms · 9.3/10
Quality-filtered residential and mobile proxies with the cleanest IP scoring.
SOAX
$6.60/GB · 890 ms · 9.1/10
Clean residential and mobile SOCKS5 with per-second billing.
IPFly
$0.80/GB · 620 ms · 9.1/10
90M+ residential pool with static ISP and datacenter proxies at value pricing.
Prices and latency come from our testing methodology. See the full provider comparison or current proxy deals.
Advantages
- + Single decisive metric
- + Comparable across pool types
- + Catches billing surprises
Trade-offs
- − Requires trials from each vendor
- − Target-specific outcomes
- − Needs maintained tooling
HTTP Proxy Comparison FAQ
What counts as a success?+
A 200 response with the expected content signature — not merely a 200 status.
How do I compare unblocker APIs to raw pools?+
Normalise both to cost per successful extraction, including your retry logic.
How often should I rerun it?+
Quarterly, or immediately after any block-rate spike.
More http / https guides
Related proxies
All proxy guides →Datacenter
Datacenter Proxy Comparison
Datacenter proxies are commoditised on speed, so a useful comparison measures block rate, subnet diversity and replacement policy instead.
Compare $/IP and block rate
SOCKS5
SOCKS5 Proxy Comparison
A SOCKS5 comparison has to cover two dimensions at once: how good the IP pool is, and how complete the SOCKS5 implementation is.
Compare protocol depth and pool
Residential
Residential Proxy Comparison
Comparing residential proxies on advertised pool size is the fastest way to overpay. The only figures that matter are success rate on your targets, median latency and effective cost per successful request.
Compare $/GB and success rate
ISP / Static residential
ISP Proxy Comparison
Comparing ISP proxies means comparing the ranges behind them: which ISP, which country, what fraud score and how the target platform classifies the address.
Compare $/IP and ASN quality
HTTP / HTTPS
HTTP Proxies
HTTP proxies operate at the application layer: they understand requests, can rewrite headers, cache responses and enforce rules — which is exactly why every scraping framework defaults to them.
$0.30 / IP – $6 / GB
HTTP / HTTPS
HTTP Proxy Providers
Every proxy network sells HTTP endpoints, so vendor selection comes down to pool quality, gateway features and how much of the retry logic they handle for you.
$0.30 / IP – $6 / GB
Best alternatives to http proxy comparison
Compare types →Alternative
SOCKS5 Proxy Comparison
Protocol-agnostic tunnelling with UDP and any-port support.
Compare protocol depth and pool
Alternative
Datacenter Proxy Comparison
Cheap, fast server IPs for volume work on tolerant targets.
Compare $/IP and block rate
Alternative
Residential Proxy Comparison
Real consumer ISP IPs — the highest trust tier for hardened targets.
Compare $/GB and success rate
Still unsure? Read our independent provider reviews or the current proxy deals.
Related articles on http proxy comparison
All articles →buying guides
Best SOCKS5 Proxy Providers in 2026: The Definitive Ranking
We benchmarked 27 SOCKS5 providers across success rate, latency, pool freshness, price per GB, and support quality. Here are the ten that actually deliver in 2026.
Proxy networks
Ultimate Proxy Provider Showdown 2026 10 Top Networks Compared with Real Pricing Performance
intermediary servers that route your requests through a different IP, with the exit type — residential, mobile, ISP or datacenter — deciding how much trust you inherit
Proxy networks
Ultimate Proxy Provider Showdown 2026 10 Top Networks Compared with Real Pricing Performance 2
intermediary servers that route your requests through a different IP, with the exit type — residential, mobile, ISP or datacenter — deciding how much trust you inherit
Social media and multi-account proxies
Best Instagram Proxies in 2026 Honest Review of Top Providers
one trusted, stable exit per account cluster, paired with an antidetect browser profile so the platform sees a coherent device and network story
Residential proxies
Best Residential Proxies 2026 Free Cheap Unlimited Webshare Compared Reddit Recommended Picks
real consumer IPs leased from opt-in SDK partners and peer networks, rotated per request or held sticky for up to 30 minutes
Residential proxies
Best Residential Proxy Providers 2026 Ultimate Comparison Guide
real consumer IPs leased from opt-in SDK partners and peer networks, rotated per request or held sticky for up to 30 minutes