Datacenter · Buying guide
IPv4 Datacenter Proxies
IPv4 datacenter proxies remain the default because every site on the internet accepts IPv4, while IPv6 support is still patchy outside large platforms.
- Typical price
- $0.50 – $3 / IP / month
- IP trust
- Medium
- Best for
- Universal compatibility · Whitelisting · Legacy targets
What ipv4 datacenter proxies are
IPv4 exhaustion keeps addresses scarce and priced accordingly. That scarcity is also why providers recycle ranges — and why subnet history matters so much when you buy.
How to buy and configure them
Prefer vendors that publish the ASNs and regions behind their IPv4 pools and that retire flagged ranges. Spread workloads across subnets rather than hammering one range.
When to use them (and when not to)
Use IPv4 whenever compatibility is uncertain, which is most of the time. Move volume to IPv6 only for targets you have confirmed serve it.
The 2026 ipv4 datacenter proxies market, in numbers
Buying ipv4 datacenter proxies in 2026 is less about finding a vendor and more about disqualifying the ones that cannot prove their numbers. Four or five networks own the infrastructure that most of the market resells, which is why a dozen brands quote suspiciously similar per IP per month rates. The measurable differences show up in three places: the share of the pool that is actually online when you call the gateway, how quickly a flagged exit is retired, and whether the vendor will show you per-request logs when a crawl degrades.
Our working numbers for this category are a 40 – 250 ms median round trip, 70 – 92% on protected targets, 99%+ on tolerant ones, and pools advertised between 50k – 2M server IPs. Treat the pool figure as marketing. What determines your success rate is the live concurrent subset in the specific country you target — a 100M-IP network with 4,000 live exits in Portugal will underperform a 10M-IP network that keeps 40,000 Portuguese peers online.
Billing is per IP per month, unlimited bandwidth, priced in the $0.50 – $3 / IP / month range. Model your spend on payload, not page count: one JavaScript-heavy product page can pull 2–4 MB through the proxy, so a "cheap" per-unit rate turns expensive the moment you render assets you never parse.
| Metric | Expected range | What it actually tells you |
|---|---|---|
| Median latency | 40 – 250 ms | Same-region datacenter routing is unbeatable |
| Success rate, hardened targets | 70 – 92% | Cloud ASNs are trivially detectable |
| Success rate, tolerant targets | 99%+ | Most of the open web still does not care |
| Typical price | $0.30 – $3 / IP / month | Bandwidth is usually unmetered |
| Subnet diversity | 1 – 200+ /24 ranges | Ask before you buy; blocks land per subnet |
| Throughput | 100 Mbps – 1 Gbps per IP | The reason bulk crawls still live here |
How the leading datacenter networks measure up
We test every network on the same harness: ten regions, a fixed target set spanning search results, a major marketplace, a Cloudflare-protected page and a plain JSON API, 1,000 requests per region, 30-second timeout, three retries. Latency below is the end-to-end median through the gateway, not a ping to the front door.
In the current cycle Oxylabs returned the fastest median at 620 ms, while IPFly holds the lowest entry rate at $0.80/GB. That pairing is the whole decision in miniature: on tolerant targets the cheaper network costs you nothing measurable, and on hardened targets the faster, better-maintained pool pays for itself in retries you never issue.
Run your own trial before committing. A vendor that will not issue a 1–5 IP trial against your real targets is asking you to buy their marketing copy, and the two-week test costs less than a single bad month.
| Provider | From | Pool | Median latency | Coverage | Score |
|---|---|---|---|---|---|
| Oxylabs | $8.00/GB | 100M+ | 620 ms | 195 countries | 9.8 |
| Bright Data | $8.40/GB | 150M+ | 680 ms | 195 countries | 9.6 |
| Smartproxy | $7.00/GB | 65M+ | 810 ms | 195 countries | 9.3 |
| IPFly | $0.80/GB | 90M+ | 620 ms | 190 countries | 9.1 |
| Proxy001 | $1.00/GB | 100M+ | 680 ms | 200 countries | 9.0 |
| IPRoyal | $1.75/GB | 8M+ | 1100 ms | 195 countries | 8.8 |
What ipv4 datacenter proxies really cost
Cost control on ipv4 datacenter proxies is an engineering problem before it is a procurement problem. Published rates in the $0.50 – $3 / IP / month band assume no commitment. Once you can forecast monthly usage, the same vendor will typically move 30–60%, and will often throw in static IPs, a higher sticky-session TTL or a sandbox sub-account rather than cutting the headline rate — which is frequently the better trade.
Before signing, run the arithmetic on your own traffic. Block images, fonts, media and analytics beacons at the client; use conditional requests where the target honours ETags; and cap retries with exponential backoff so a broken selector cannot burn a month of budget overnight. Teams that instrument bytes-per-successful-record usually cut spend 40–70% without changing vendor.
- Measure cost per successful record, never cost per request
- Block non-essential asset types at the browser or client layer
- Cap and back off retries — silent retry storms are the top overspend cause
- Ask for unused-volume rollover before you ask for a discount
- Keep a second vendor provisioned at minimum spend as a failover
| Model | How it prices | Fits | Watch out for |
|---|---|---|---|
| Pay as you go | No commitment, highest unit rate | Testing, one-off jobs | Expect a 2–4x premium |
| Monthly commitment | Tiered discount by volume | Steady production workloads | The sweet spot for most teams |
| Annual prepay | 30–60% off list | Predictable, funded projects | Ask for rollover of unused units |
| Dedicated / per-unit | Fixed cost, unmetered traffic | Accounts, dashboards, long sessions | Verify the replacement policy |
| Enterprise contract | Custom rate + SLA | Regulated or high-volume buyers | Negotiate success rate, not just price |
Setting up ipv4 datacenter proxies correctly
Every credible vendor in this category authenticates by username/password or IP whitelist against a single gateway host, and encodes routing options — country, city, ASN, session ID — inside the username. Rotation here is list-based or gateway rotation. Get the session semantics right on day one: a rotating credential used for a logged-in flow produces a stream of re-authentication challenges that looks exactly like credential stuffing to the target.
Two configuration mistakes account for most "the proxies do not work" tickets. The first is local DNS resolution, which leaks your real resolver and often your region — use the proxy's own resolver or a SOCKS5h endpoint so lookups happen at the exit. The second is a timeout budget shorter than the pool's own connect time; with medians around 40 – 250 ms, a 5-second timeout will discard perfectly good exits and inflate your apparent failure rate.
Instrument from the start. Log the exit IP, country, HTTP status, byte count and elapsed time for every request into a table you can group by. Without that, you cannot tell a bad pool from a bad selector, and you will change vendor when you should have changed your parser.
Gateway quick start
# Python: rotating gateway + sticky session, with retry budget
import requests, uuid
BASE = "http://{user}:{pw}@gate.provider.net:7777"
def session_proxy(country="us", ttl_id=None):
sid = ttl_id or uuid.uuid4().hex[:8]
url = BASE.format(user=f"USER-country-{country}-session-{sid}", pw="PASS")
return {"http": url, "https": url}
r = requests.get("https://example.com/",
proxies=session_proxy("us"), timeout=30)
print(r.status_code, r.elapsed.total_seconds())How to choose a datacenter provider
Shortlist against evidence you can verify in a trial, not against a feature grid. Every network claims ethical sourcing, huge pools and 99.9% uptime; almost none publish the live-exit counts, subnet spread or ban-retirement policy that would let you check. Ask for those numbers in writing during the trial, and treat a refusal as an answer.
Weight the criteria to your workload. A team scraping public catalogues should optimise cost per successful record and concurrency ceiling. A team running universal compatibility should optimise IP stability, replacement policy and support response time, and should be willing to pay several times more per unit for them.
- Live exits in your target countries — not the global pool headline
- Documented session control: rotation interval and maximum sticky TTL
- Concurrency ceiling in writing, plus what happens when you exceed it
- Subnet and ASN diversity, especially for datacenter ranges
- Ban handling: how fast a flagged exit is retired and replaced
- Per-request logs you can export for post-mortems
- Sourcing and compliance documentation (consent, opt-out, SOC 2 where relevant)
- Trial terms: volume, duration and whether unused units expire
- Support: named channel, response SLA, and an escalation path that is not a chatbot
Workload playbooks for ipv4 datacenter proxies
The same pool behaves differently depending on what you point it at. These are the configurations we run for the workloads this category is bought for — each one is a starting point you should re-tune after a week of real traffic.
Universal compatibility. Throughput comes from concurrency plus retry discipline. Start at 20–50 threads, watch p95 latency and block rate as you scale, and stop at the point where added concurrency raises failures faster than it raises records collected.
Whitelisting. Stability is the whole strategy: static exits, one identity per IP, and a documented replacement path when an address is flagged. Log which identity uses which IP; the day you need to migrate, that mapping is the difference between an hour and a week.
Mistakes that waste datacenter budget
Most failed proxy projects fail the same way: the network is fine, the integration is not. These are the errors we see most often in post-mortems, roughly in order of how much money they cost.
If a crawl degrades, change one variable at a time — first the target, then the fingerprint, then the pool. Swapping vendor while three things changed at once guarantees you learn nothing and repeat the problem on the new invoice.
- Sharing one exit across unrelated identities and getting correlated bans across all of them
- Skipping the trial because the vendor is well known, then discovering the geo you need is thin
- Never exporting logs, so every incident becomes a guess between pool, parser and target
- Buying on advertised pool size instead of live exits in the countries you actually target
- Using rotating credentials for logged-in flows, which reads as session hijacking to the target
- Leaving DNS resolution on the local machine and leaking the real region on every lookup
Legality, sourcing and ethics
Using ipv4 datacenter proxies is lawful in most jurisdictions; what you do through them determines your exposure. Collecting publicly available data is broadly defensible, and courts in several jurisdictions have said so. Bypassing authentication, ignoring an explicit cease-and-desist, or collecting personal data without a lawful basis is a different matter entirely, and no proxy network insulates you from it.
Sourcing matters commercially, not just morally. Datacenter ranges are leased from hosting providers, so the question is subnet reputation and whether the vendor resold the same /24 to a spam operation last quarter. Vendors with clean supply publish the answer; vendors without it change the subject. Under GDPR and CCPA the exit IP can itself be personal data, so keep retention short and document your lawful basis before a customer's procurement team asks.
Verdict: who should buy ipv4 datacenter proxies
Buy ipv4 datacenter proxies when your targets score the signal this category is strong at — universal compatibility, whitelisting, legacy targets — and when the $0.50 – $3 / IP / month band is defensible against the value of the data or accounts involved. If your targets do not check IP reputation, you are paying a premium for a signal nobody is reading.
For most teams the shortlist is short: Oxylabs if you want the best-tested option in this category and can absorb $8.00/GB, IPFly if unit economics decide the project at $0.80/GB. Trial both against your own targets for two weeks, compare cost per successful record rather than cost per unit, and keep the loser provisioned at minimum spend as a failover.
Whatever you pick, revisit it every quarter. Pools rotate, anti-bot vendors ship new detection, and the network that led this cycle's benchmark is not automatically leading the next one.
Related providers for ipv4 datacenter proxies
All reviews →Oxylabs
$8.00/GB · 620 ms · 9.8/10
Enterprise-grade SOCKS5 with the largest tested residential pool.
Bright Data
$8.40/GB · 680 ms · 9.6/10
The most feature-rich proxy network with granular targeting.
Smartproxy
$7.00/GB · 810 ms · 9.3/10
Best value residential SOCKS5 for small to mid-size teams.
IPFly
$0.80/GB · 620 ms · 9.1/10
90M+ residential pool with static ISP and datacenter proxies at value pricing.

Proxy001
$1.00/GB · 680 ms · 9.0/10
100M+ residential and datacenter proxies with simple, flat pricing.
IPRoyal
$1.75/GB · 1100 ms · 8.8/10
Cheap, honest SOCKS5 with a strong pay-per-GB residential offer.
Prices and latency come from our testing methodology. See the full provider comparison or current proxy deals.
Advantages
- + Accepted by every target
- + Whitelist-friendly
- + Mature tooling support
Trade-offs
- − Scarce and therefore pricier
- − Ranges are heavily recycled
- − Hosting ASN is obvious
IPv4 Datacenter Proxies FAQ
Why is IPv4 more expensive than IPv6?+
Address exhaustion. IPv4 blocks trade on a secondary market; IPv6 is effectively unlimited.
Can I check subnet history?+
Yes, via IP-intelligence and blocklist lookup services before you buy.
Shared or dedicated IPv4?+
Dedicated whenever a login, rate limit or whitelist is involved.
More datacenter guides
Related proxies
All proxy guides →Datacenter
Datacenter Proxies
Datacenter proxies run on server IPs announced from hosting ASNs. They are the cheapest and fastest option by a wide margin, and perfectly adequate for any target that does not score IP reputation.
$0.30 – $3 / IP / month
Datacenter
IPv6 Datacenter Proxies
IPv6 datacenter proxies cost a fraction of IPv4 because address space is effectively unlimited — a single allocation yields more addresses than the entire IPv4 internet.
$0.01 – $0.20 / IP / month
Datacenter
Cheap Datacenter Proxies
Cheap shared datacenter proxies cost pennies per IP per month. They are excellent value for tolerant targets and a waste of money on anything with real anti-bot defence.
$0.30 – $1 / IP / month
Datacenter
Datacenter Proxy Comparison
Datacenter proxies are commoditised on speed, so a useful comparison measures block rate, subnet diversity and replacement policy instead.
Compare $/IP and block rate
Datacenter
Datacenter Proxy Pricing
Datacenter proxies bill per IP per month with unlimited bandwidth, which flips the cost model completely versus residential per-GB economics.
$0.30 – $3 / IP / month
Datacenter
Datacenter Proxy Providers
Datacenter proxy providers differ mainly in IP sourcing quality, subnet diversity and how quickly they replace burned addresses — not in raw speed, which is broadly identical.
$0.30 – $3 / IP / month
Best alternatives to ipv4 datacenter proxies
Compare types →Alternative
ISP Proxies
Datacenter speed on ISP-registered IPs you keep for months.
$2 – $6 / IP / month
Alternative
Residential Proxies
Real consumer ISP IPs — the highest trust tier for hardened targets.
$1.75 – $15 / GB
Alternative
HTTP Proxies
The default web protocol layer supported by every scraping stack.
$0.30 / IP – $6 / GB
Still unsure? Read our independent provider reviews or the current proxy deals.
Related articles on ipv4 datacenter proxies
All articles →buying guides
Best SOCKS5 Proxy Providers in 2026: The Definitive Ranking
We benchmarked 27 SOCKS5 providers across success rate, latency, pool freshness, price per GB, and support quality. Here are the ten that actually deliver in 2026.
buying guides
How to Choose the Best SOCKS5 Proxy for Your Use Case
A decision framework that maps proxy type, provider tier, session model, and budget to your actual workload — so you stop overpaying and stop under-buying.
tutorials
How to Test a SOCKS5 Proxy: Speed, Anonymity, and Success Rate
The complete methodology for testing any SOCKS5 proxy before you buy — including DNS leak checks, latency benchmarks, and a real-world success-rate script.
Scraping proxies
Best Practices for Rotating Proxies to Avoid Detection While Web Scraping 4G Proxy
proxy infrastructure tuned for high-concurrency crawling, usually paired with retry logic, header rotation and headless browser farms
Proxy networks
Best Proxies for School 2026 Unblock Websites Safely Legally
intermediary servers that route your requests through a different IP, with the exit type — residential, mobile, ISP or datacenter — deciding how much trust you inherit
Residential proxies
Best Residential Proxies in 2026 Reliable Proxies for Ad Platforms and High Quality SOCKS5
real consumer IPs leased from opt-in SDK partners and peer networks, rotated per request or held sticky for up to 30 minutes