ISP / Static residential · Buying guide
Static ISP Proxies
Static ISP proxies are fixed addresses you keep for the whole billing period — no rotation, no session TTL, no surprise IP change halfway through a checkout.
- Typical price
- $2 – $6 / IP / month
- IP trust
- High
- Best for
- Persistent identities · Whitelisting · Seller accounts
What static isp proxies are
Stability is a trust signal. Platforms that see the same ISP IP every day for months treat the account as an ordinary returning user, which is precisely what rotating pools cannot deliver.
How to buy and configure them
Reserve one IP per identity, record the mapping, and keep the browser profile, timezone and locale consistent with the IP's geolocation. Renew before expiry — lapsed IPs are usually reassigned.
When to use them (and when not to)
Use static ISP for anything with a login and long life. Use rotating residential for stateless data collection where a fixed address would be rate-limited.
The 2026 static isp proxies market, in numbers
Two forces shaped the ISP / static residential proxy market in 2026: anti-bot vendors got better at scoring networks, and buyers got better at reading invoices. Four or five networks own the infrastructure that most of the market resells, which is why a dozen brands quote suspiciously similar per IP per month rates. The measurable differences show up in three places: the share of the pool that is actually online when you call the gateway, how quickly a flagged exit is retired, and whether the vendor will show you per-request logs when a crawl degrades.
Our working numbers for this category are a 150 – 450 ms median round trip, 94 – 98% on account platforms, and pools advertised between 500k – 10M ISP-registered IPs. Treat the pool figure as marketing. What determines your success rate is the live concurrent subset in the specific country you target — a 100M-IP network with 4,000 live exits in Portugal will underperform a 10M-IP network that keeps 40,000 Portuguese peers online.
Billing is per IP per month, bandwidth usually unlimited, priced in the $2 – $6 / IP / month range. Model your spend on payload, not page count: one JavaScript-heavy product page can pull 2–4 MB through the proxy, so a "cheap" per-unit rate turns expensive the moment you render assets you never parse.
| Metric | Expected range | What it actually tells you |
|---|---|---|
| Median latency | 150 – 450 ms | Datacenter hardware, ISP registration |
| Success rate, account platforms | 94 – 98% | Stability beats rotation for logged-in work |
| Typical price | $1.50 – $6 / IP / month | Unlimited bandwidth on most plans |
| Geo coverage | 8 – 40 countries | Far narrower than rotating residential |
| Uptime | 99.9%+ | No peer devices going offline |
| Replacement policy | 0 – 30 day swap window | The single most important contract term |
How the leading ISP / static residential networks measure up
We test every network on the same harness: ten regions, a fixed target set spanning search results, a major marketplace, a Cloudflare-protected page and a plain JSON API, 1,000 requests per region, 30-second timeout, three retries. Latency below is the end-to-end median through the gateway, not a ping to the front door.
In the current cycle Oxylabs returned the fastest median at 620 ms, while IPFly holds the lowest entry rate at $0.80/GB. That pairing is the whole decision in miniature: on tolerant targets the cheaper network costs you nothing measurable, and on hardened targets the faster, better-maintained pool pays for itself in retries you never issue.
Run your own trial before committing. A vendor that will not issue a 1–5 IP trial against your real targets is asking you to buy their marketing copy, and the two-week test costs less than a single bad month.
| Provider | From | Pool | Median latency | Coverage | Score |
|---|---|---|---|---|---|
| Oxylabs | $8.00/GB | 100M+ | 620 ms | 195 countries | 9.8 |
| Bright Data | $8.40/GB | 150M+ | 680 ms | 195 countries | 9.6 |
| NodeMaven | $3.99/GB | 30M+ | 700 ms | 150 countries | 9.3 |
| IPFly | $0.80/GB | 90M+ | 620 ms | 190 countries | 9.1 |
| Proxy001 | $1.00/GB | 100M+ | 680 ms | 200 countries | 9.0 |
| Rayobyte | $4.00/GB | 20M+ | 720 ms | 55 countries | 8.7 |
What static isp proxies really cost
Cost control on static isp proxies is an engineering problem before it is a procurement problem. Published rates in the $2 – $6 / IP / month band assume no commitment. Once you can forecast monthly usage, the same vendor will typically move 30–60%, and will often throw in static IPs, a higher sticky-session TTL or a sandbox sub-account rather than cutting the headline rate — which is frequently the better trade.
Before signing, run the arithmetic on your own traffic. Block images, fonts, media and analytics beacons at the client; use conditional requests where the target honours ETags; and cap retries with exponential backoff so a broken selector cannot burn a month of budget overnight. Teams that instrument bytes-per-successful-record usually cut spend 40–70% without changing vendor.
- Measure cost per successful record, never cost per request
- Block non-essential asset types at the browser or client layer
- Cap and back off retries — silent retry storms are the top overspend cause
- Ask for unused-volume rollover before you ask for a discount
- Keep a second vendor provisioned at minimum spend as a failover
| Model | How it prices | Fits | Watch out for |
|---|---|---|---|
| Pay as you go | No commitment, highest unit rate | Testing, one-off jobs | Expect a 2–4x premium |
| Monthly commitment | Tiered discount by volume | Steady production workloads | The sweet spot for most teams |
| Annual prepay | 30–60% off list | Predictable, funded projects | Ask for rollover of unused units |
| Dedicated / per-unit | Fixed cost, unmetered traffic | Accounts, dashboards, long sessions | Verify the replacement policy |
| Enterprise contract | Custom rate + SLA | Regulated or high-volume buyers | Negotiate success rate, not just price |
Setting up static isp proxies correctly
Every credible vendor in this category authenticates by username/password or IP whitelist against a single gateway host, and encodes routing options — country, city, ASN, session ID — inside the username. Rotation here is none — the IP is yours for the term. Get the session semantics right on day one: a rotating credential used for a logged-in flow produces a stream of re-authentication challenges that looks exactly like credential stuffing to the target.
Two configuration mistakes account for most "the proxies do not work" tickets. The first is local DNS resolution, which leaks your real resolver and often your region — use the proxy's own resolver or a SOCKS5h endpoint so lookups happen at the exit. The second is a timeout budget shorter than the pool's own connect time; with medians around 150 – 450 ms, a 5-second timeout will discard perfectly good exits and inflate your apparent failure rate.
Instrument from the start. Log the exit IP, country, HTTP status, byte count and elapsed time for every request into a table you can group by. Without that, you cannot tell a bad pool from a bad selector, and you will change vendor when you should have changed your parser.
Gateway quick start
# Python: rotating gateway + sticky session, with retry budget
import requests, uuid
BASE = "http://{user}:{pw}@gate.provider.net:7777"
def session_proxy(country="us", ttl_id=None):
sid = ttl_id or uuid.uuid4().hex[:8]
url = BASE.format(user=f"USER-country-{country}-session-{sid}", pw="PASS")
return {"http": url, "https": url}
r = requests.get("https://example.com/",
proxies=session_proxy("us"), timeout=30)
print(r.status_code, r.elapsed.total_seconds())How to choose a ISP / static residential provider
Shortlist against evidence you can verify in a trial, not against a feature grid. Every network claims ethical sourcing, huge pools and 99.9% uptime; almost none publish the live-exit counts, subnet spread or ban-retirement policy that would let you check. Ask for those numbers in writing during the trial, and treat a refusal as an answer.
Weight the criteria to your workload. A team scraping public catalogues should optimise cost per successful record and concurrency ceiling. A team running persistent identities should optimise IP stability, replacement policy and support response time, and should be willing to pay several times more per unit for them.
- Live exits in your target countries — not the global pool headline
- Documented session control: rotation interval and maximum sticky TTL
- Concurrency ceiling in writing, plus what happens when you exceed it
- Subnet and ASN diversity, especially for ISP / static residential ranges
- Ban handling: how fast a flagged exit is retired and replaced
- Per-request logs you can export for post-mortems
- Sourcing and compliance documentation (consent, opt-out, SOC 2 where relevant)
- Trial terms: volume, duration and whether unused units expire
- Support: named channel, response SLA, and an escalation path that is not a chatbot
Workload playbooks for static isp proxies
The same pool behaves differently depending on what you point it at. These are the configurations we run for the workloads this category is bought for — each one is a starting point you should re-tune after a week of real traffic.
Persistent identities. Throughput comes from concurrency plus retry discipline. Start at 20–50 threads, watch p95 latency and block rate as you scale, and stop at the point where added concurrency raises failures faster than it raises records collected.
Whitelisting. Stability is the whole strategy: static exits, one identity per IP, and a documented replacement path when an address is flagged. Log which identity uses which IP; the day you need to migrate, that mapping is the difference between an hour and a week.
Mistakes that waste ISP / static residential budget
Most failed proxy projects fail the same way: the network is fine, the integration is not. These are the errors we see most often in post-mortems, roughly in order of how much money they cost.
If a crawl degrades, change one variable at a time — first the target, then the fingerprint, then the pool. Swapping vendor while three things changed at once guarantees you learn nothing and repeat the problem on the new invoice.
- Downloading images, fonts and video you never parse — pure metered waste
- Running unbounded retries, which converts one broken selector into a five-figure invoice
- Sharing one exit across unrelated identities and getting correlated bans across all of them
- Skipping the trial because the vendor is well known, then discovering the geo you need is thin
- Never exporting logs, so every incident becomes a guess between pool, parser and target
- Buying on advertised pool size instead of live exits in the countries you actually target
Legality, sourcing and ethics
Using static isp proxies is lawful in most jurisdictions; what you do through them determines your exposure. Collecting publicly available data is broadly defensible, and courts in several jurisdictions have said so. Bypassing authentication, ignoring an explicit cease-and-desist, or collecting personal data without a lawful basis is a different matter entirely, and no proxy network insulates you from it.
Sourcing matters commercially, not just morally. Consumer IPs reach the pool through SDK partnerships and bandwidth-sharing apps, so ask how consent is obtained, whether peers can opt out, and what the compensation model is. Vendors with clean supply publish the answer; vendors without it change the subject. Under GDPR and CCPA the exit IP can itself be personal data, so keep retention short and document your lawful basis before a customer's procurement team asks.
Verdict: who should buy static isp proxies
Buy static isp proxies when your targets score the signal this category is strong at — persistent identities, whitelisting, seller accounts — and when the $2 – $6 / IP / month band is defensible against the value of the data or accounts involved. If your targets do not check IP reputation, you are paying a premium for a signal nobody is reading.
For most teams the shortlist is short: Oxylabs if you want the best-tested option in this category and can absorb $8.00/GB, IPFly if unit economics decide the project at $0.80/GB. Trial both against your own targets for two weeks, compare cost per successful record rather than cost per unit, and keep the loser provisioned at minimum spend as a failover.
Whatever you pick, revisit it every quarter. Pools rotate, anti-bot vendors ship new detection, and the network that led this cycle's benchmark is not automatically leading the next one.
Related providers for static isp proxies
All reviews →Oxylabs
$8.00/GB · 620 ms · 9.8/10
Enterprise-grade SOCKS5 with the largest tested residential pool.
Bright Data
$8.40/GB · 680 ms · 9.6/10
The most feature-rich proxy network with granular targeting.
NodeMaven
$3.99/GB · 700 ms · 9.3/10
Quality-filtered residential and mobile proxies with the cleanest IP scoring.
IPFly
$0.80/GB · 620 ms · 9.1/10
90M+ residential pool with static ISP and datacenter proxies at value pricing.

Proxy001
$1.00/GB · 680 ms · 9.0/10
100M+ residential and datacenter proxies with simple, flat pricing.
Rayobyte
$4.00/GB · 720 ms · 8.7/10
US-focused SOCKS5 with strong datacenter and ISP options.
Prices and latency come from our testing methodology. See the full provider comparison or current proxy deals.
Advantages
- + Same IP for months
- + Whitelistable with partners
- + Unlimited bandwidth
Trade-offs
- − No rotation for wide crawling
- − Replacement costs money
- − Limited city granularity
Static ISP Proxies FAQ
How long do I keep the IP?+
For as long as you keep paying; most vendors reassign quickly after cancellation.
Can I move an IP to another country?+
No — you order a new IP in the target country instead.
Static ISP or mobile for accounts?+
ISP is cheaper and adequate for most; mobile for the strictest platforms.
More isp / static residential guides
Related proxies
All proxy guides →ISP / Static residential
ISP Proxies
ISP proxies combine the two things you normally have to choose between: an IP registered to a consumer ISP and hardware in a datacenter with gigabit uplinks and unlimited bandwidth.
$2 – $6 / IP / month
ISP / Static residential
ISP Proxy Comparison
Comparing ISP proxies means comparing the ranges behind them: which ISP, which country, what fraud score and how the target platform classifies the address.
Compare $/IP and ASN quality
ISP / Static residential
ISP Proxy Providers
ISP proxy providers are judged on the quality of the ranges they lease, the countries they cover and how fast they replace an IP that a platform has flagged.
$2 – $6 / IP / month
ISP / Static residential
ISP Proxy Reviews
Our ISP proxy reviews test the ranges, not the landing page: ASN verification, platform login behaviour, latency, uptime and how support responds when an IP goes bad.
Independent testing
ISP / Static residential
ISP Residential Proxies
ISP residential proxies is the marketing name for static residential: consumer-ISP IP registration on datacenter infrastructure, sold per IP with unlimited traffic.
$2 – $6 / IP / month
Datacenter
IPv4 Datacenter Proxies
IPv4 datacenter proxies remain the default because every site on the internet accepts IPv4, while IPv6 support is still patchy outside large platforms.
$0.50 – $3 / IP / month
Best alternatives to static isp proxies
Compare types →Alternative
Residential Proxies
Real consumer ISP IPs — the highest trust tier for hardened targets.
$1.75 – $15 / GB
Alternative
Datacenter Proxies
Cheap, fast server IPs for volume work on tolerant targets.
$0.30 – $3 / IP / month
Alternative
Mobile Proxies
Carrier-grade NAT IPs shared with thousands of real phones.
$40 – $120 / port / month
Still unsure? Read our independent provider reviews or the current proxy deals.
Related articles on static isp proxies
All articles →buying guides
How to Choose the Best SOCKS5 Proxy for Your Use Case
A decision framework that maps proxy type, provider tier, session model, and budget to your actual workload — so you stop overpaying and stop under-buying.
tutorials
How to Set Up a SOCKS5 Proxy: The Complete Step-by-Step Guide
A practical walkthrough for configuring SOCKS5 in your browser, OS, terminal, and scraping stack — with authentication, DNS-through-proxy, and troubleshooting.
proxy security
How to Use a SOCKS5 Proxy Safely and Effectively
Operational best practices for using SOCKS5 in production: authentication hygiene, session management, error handling, rate limiting, and staying out of trouble.
Proxy networks
Best Proxies for Japan 2026 Complete Guide to Japanese IP Addresses
intermediary servers that route your requests through a different IP, with the exit type — residential, mobile, ISP or datacenter — deciding how much trust you inherit
Proxy networks
Dedicated Static IP Proxies in 2026
intermediary servers that route your requests through a different IP, with the exit type — residential, mobile, ISP or datacenter — deciding how much trust you inherit
Datacenter proxies
Honest Review of IPFly Residential ISP Datacenter Proxies
IPs announced from cloud and colocation ASNs, sold as dedicated or shared IPv4/IPv6 blocks with unmetered bandwidth